SnugGrab™ SE1 – Silicone Elbow Support Strap

How To Wear/Wash/Care/Measure NAROO mask

How To Measure Your Mask Size

Most of our mask models are universal size because the fabric has stretch. But for the F.U+ Mask, F.U+ Copper, F1S, and N0U models we have size grading.

Measure your face as follows using either a measuring tape or a piece of string and a ruler:

For the face + tubular gaiters (masks like F5s, F5 etc), measure from the bridge of your nose, to the bottom of your neck.

For the face masks (F.U Plus, F.U Plus Copper, N0U) measure from the bridge of your nose to your chin.

How To Wear Your Mask

To get the most functionality out of your NAROO mask, please check out our “How-to-wear” Videos.

F.U Plus and F.U Plus Copper – Filtering Face Masks

Z5H – Winter Face Cover

F5 – Filtering Neck Warmer

How To Wash And Care For Your Mask

To get the most functionality out of your NAROO mask, please check out our “How-to-wear” Videos.

Soak your mask.

Put a neutral detergent in lukewarm water. Spread out the mask in the water and wait for 5 minutes

Note: No hot water!Note: Outdoor detergents, shampoos, and wool shampoos are all neutral detergents.

Gently wash

Wash your mask gently without harshly rubbing or twisting the fabric. Then rinse gently.

Note: If you wash harshly, the nose clip may deform.

Rinse

Rinse the mask several times in clean water. Clean the inside of the mask under running water.

Note: Again, avoid harsh scrubbing and wash gently.

Squeeze out the water

When removing the water, do not twist the fabric! Squeeze the mask between your hands.

Note: Care should be taken during the drying process to minimize stretching.

Air dry

After gently squeezing out the water, let your mask air dry in a shady, well-ventilated area.

If you follow these 5 steps, you can use your NAROO mask for a long, long time.